10^th World Congress and Expo on Green Energy July 18-19, 2022 Amsterdam, Netherlands

Renewable Energy comes from non-conventional energy that is continuously replenished by natural processes. It’s attracted plenty of attention within the recent past due to exhaustion of fossil fuels and within the lookout for alternate energy for a clean and green future. Totally different varied kinds of renewable energy embody solar power, wind energy, hydro energy, heat energy, wave and tidal energy. Supported the report of REN21's 2014, renewable contributed 19 % to our energy consumption and 22 % to our electricity generation in 2012 and 2013. Renewable power is cost effective, reliable, property, and environmentally friendly. Recently the renewable energy sector is already providing quite 450,000 jobs associated has an annual turnover exceeding 45 billion Euros. Since 2009, 25 solar projects totalling quite 8,000 megawatts, and 9 wind comes totalling quite 4,000 megawatts, are approved on public lands within the U.S. That’s enough electricity to power nearly four million yankee homes. The worldwide renewable energy market (excluding biofuels) reached $432.7 billion in 2013 and $476.3 billion in 2014. This market is predicted to extend to $777.6 billion in 2019, with a compound annual rate of growth (CAGR) of 10.3% from 2014 to 2019.

• 
  Biomass Conversion


• 
  Solar Thermal Applications


• 
  Wind Energy Technology


• 
  Solar and Low Energy Architecture


• 
  Climatology and Meteorology


• 
  Geothermal Technology


• 
  Wave, Tide and Ocean Thermal Energies


• 
  Hydro Power


• 
  Hydrogen Production Technology and Fuel Cells


• 
  Photovoltaic Technology Conversion

Green nanotechnology typically refers to the use of applied science to strengthen the environmental property of processes producing negative externalities. It to boot refers to the employment of the product of applied science to strengthen property. It includes making inexperienced Nano-products and exploitation Nano-products in support of property. Green applied science has been depicted as a result of the event of recent technologies, to attenuate potential environmental and human health risks associated with the manufacture and use of nanotechnology product, and to encourage replacement of existing product with new Nano-products that square measure further surroundings friendly throughout their lifecycle producing nanomaterial’s and products whereas not harming the surroundings or human health, and producing Nano-products that supply solutions to environmental problems. It uses existing principles of green chemistry and green engineering to make nanomaterials and Nano-products whereas not toxic ingredients, at low temperatures pattern less energy and renewable inputs wherever potential and pattern lifecycle thinking all told style and engineering stages.

• 
  Treatment and remediation


• 
  Pollution sensing and detection


• 
  Nanotechnology for sustainable energy production


• 
  Bio-inspired nano-materials and their applications


• 
  Nano sorbents

Waste-to-energy (WtE) is the process of generating energy in the form of electricity and/or heat from the primary treatment of waste, or the processing of waste into a fuel source. WtE is a form of energy recovery. Most WtE processes generate electricity and/or heat directly through combustion, or produce a combustible fuel commodity, such as methane, methanol, ethanol or synthetic fuels. The term WtE is commonly used in specific reference to incineration which burns completely combusted waste at ultra-high temperatures allowing for energy recovery. Modern incineration facilities use pollution control equipment to prevent the release of emissions into the environment.  Currently incineration is the only WtE technology that is economically viable and operationally feasible at commercial scale.

• 
  Agriculture, Forest Waste & waste management


• 
  Waste to energy Technologies


• 
  Transforming the Strategy into Reality


• 
  Thermal Treatment


• 
  Waste, Energy & climate Change Policy

Green process and Synthesis could be a bimonthly, peer-reviewed journal that gives up-to-date analysis each on basic as well as applied aspects of innovative green method development and chemical synthesis, giving an appropriate share to industrial views. The contributions are innovative, high-impact, authoritative, and supply each professionals and cons of potential technologies. Green process and Synthesis provides a platform for scientists and engineers, particularly chemists and chemical engineers, however is also open for knowledge base analysis from alternative areas like physics, materials science, or chemical process. The Novel water-borne coatings via hybrid mini emulsion polymerisation area unit extremely getting used and for pollution bar within the storage device business the data of this subject is incredibly necessary. For Eliminating solvents and acids in wafer process yet as Qualitative and measurement for environmentally benign electroplating operations ought to be done well. The solar power is in action these days and incorporates a nice impact on the energy resources.

• 
  Solar energy in thermo-chemical processing


• 
  Solar Energy as a green energy


• 
  Green Applications of Carbondioxide


• 
  Solar Heating and Cooling


• 
  Solar Battery Storage


• 
  Solar Tower Technology

• 
  Lignocellulosic Biomass


• 
  Thermochemical Routes


• 
  Syngas from Biomass


• 
  Syngas from Biomass


• 
  Second generation biofuels


• 
  Microbial pathways for advanced biofuels production


• 
  Synthesis of advanced biofuels


• 
  Commercialization of next generation Bio-fuels


• 
  Hydrogen Fuel cells


• 
  Wastewater based algae Bio-fuels production

Energy and Environment co-related within the technological and scientific aspects as well as energy conservation, and also the interaction of energy forms and systems with the physical setting. The degree of atmospherically greenhouse gas has enlarged by 31st between 1800 and 2000, going from 280 parts per million to 367 parts per million. Scientists predict that greenhouse gas levels may well be as high as 970 parts per million by the year 2100. Various factors are liable for this development, like progress with respect to technical parameters of energy converters, especially, improved efficiency; emissions characteristics and increased life. Numerous environmental policies are enforced across the world for reduction of GHG emissions for improvement of environment.

• 
  Wind Energy


• 
  Solar Energy


• 
  Hydroelectric Energy


• 
  Wave and Tidal Energy


• 
  Geothermal Energy

Pollution is the introduction of contaminants into the natural environment that causes adverse change. Pollution can take the form of chemical substances or energy, such as noise, heat or light. Pollutants, the components of pollution, can be either foreign substances/energies or naturally occurring contaminants. Pollution is often classed as point source or nonpoint source pollution. In 2015, pollution killed 9 million people in the world.

• 
  Methods of Environmental Analysis


• 
  Soil Pollution and Remediation, Solidwaste Disposal


• 
  Environmental modelling


• 
  Waste management and recycling


• 
  Toxicity and Ecotoxicity


• 
  Environmental Control Technology of Air, Water and Soil Pollution

Sustainable architecture is architecture that seeks to minimize the negative environmental impact of buildings by efficiency and moderation in the use of materials, energy, and development space and the ecosystem at large. Sustainable architecture uses a conscious approach to energy and ecological conservation in the design of the built environment. The idea of sustainability, or ecological design, is to ensure that our actions and decisions today do not inhibit the opportunities of future generations. Energy efficiency over the entire life cycle of a building is the most important goal of sustainable architecture. Architects use many different passive and active techniques to reduce the energy needs of buildings and increase their ability to capture or generate their own energy. One of the keys to exploit local environmental resources and influence energy-related factors such as daylight, solar heat gains and ventilation is the use of site analysis.

• 
  Renewable energy generation


• 
  Sustainable urbanism and architecture


• 
  Heating, ventilation and cooling system efficiency

Environmental Engineering involves applying science and engineering practices to how we tend to utilize and impact our natural resources. Trendy environmental engineers work on solutions to problems like pollution reduction and pack up, energy consumption and emissions, land erosion, water treatment and waste management in a shot to properly manage and maintain the standard of our soil, water and air. By action the event of third generation catalysts, this volume presents trends and opportunities in tutorial and industrial analysis.

• 
  Pollution and monitoring


• 
  Air pollution


• 
  Solid waste management


• 
  Sustainable tourism


• 
  Waste Management (industrial, domestic, natural)


• 
  Biodiversity Conservation & Protected Areas Management


• 
  Modeling, simulation, and optimization

Renewable energy and energy efficiency are typically aforementioned to be the "twin pillars" of property energy policy. Each resource ought to be developed so as to stabilize and cut back oxide emissions. There are various energy policies on a worldwide scale in relation to energy exploration, production and consumption, ranging from commodities companies to automobile manufacturers to wind and star producers and business associations. Recent focus of energy economic science includes the next issues: temperature change and climate policy, property, energy markets and process, political economy of energy infrastructure, energy and environmental law and policies and warming alongside exploring varied challenges associated with quick the diffusion of renewable energy technologies in developing countries. Most of the agricultural facilities at intervals the developed world are mechanized as a result of rural electrification. Rural electrification has created necessary productivity gains; however it additionally uses lots of energy. For this and various reasons (such as transport costs) throughout a low-carbon society, rural areas would want obtainable provides of renewably created electricity.

• 
  Space Based Solar Power (SPSV)


• 
  Biomass & Biogas


• 
  Sustainable coal use and clean coal technologies


• 
  Potential Benefits of Energy Efficiency


• 
  Thorium Fuel Cycle


• 
  Geothermal Energy


• 
  Solar Power & Artificial Synthesis